• 1

2024 Neilpryde Fly II

Print
In Stock On SALE 25% Off RRP Sizes : 2.4m $1,250 Now $935 / 3.0m $1,300 Now $975 / 4.3m $1,480 Now $1,110 / 4.7m $1,530 Now $1,145 / 5.0m $1,570 Now $1,175 / 5.4m $1,620 Now $1,215 / 5.7m $1,660 Now $1,245 / 6.0m $1,700 Now $1,275 / 6.7m $1,750 Now $1,300
MODEL-FLY2-50-231212_Oben-01-CC1.jpg-neilpryde-2024
MODEL-FLY2-50-231212_Frontal-Unten-Seite-02-CC1.jpg-neilpryde-2024
MODEL-FLY2-50-230924_Frontal-02-REG-CC2.jpg-neilpryde-2024
MODEL-FLY2-50-231212_Fronthandle-02-CC1.jpg-neilpryde-2024
MODEL-FLY2-50-231212_Oben-01-CC2.jpg-neilpryde
MODEL-FLY2-50-231212_Frontal-Unten-Seite-01-CC1_0002.jpg-neilpryde-2024
Description

2024 Neilpryde FLY II

Sizes : 1.8m $1,160 / 2.4m $1,250 / 3.0m $1,300 / 3.5m $1,380 / 4.0m $1,430 / 4.3m $1,480 / 4.7m $1,530 / 5.0m $1,570 / 5.4m $1,620 / 5.7m $1,660 / 6.0m $1,700 / 6.7m $1,750

JUST FLY!

The 2024 FLY II represents an evolutionary leap from the original model that features new materials, even more advanced 3D flying shapes, and a host of enhancements aimed at improving performance and enhancing the user experience.

Continuing with the unique high lift coefficient concept, it features an even stiffer airframe and a new twist profile, greatly enhancing handling and control in high wind conditions. The canopy tension distribution, originally derived from windsurfing sail design, has been fine-tuned to improve upwind speed and handling through upwind maneuvers. The dihedral front profile has been reshaped for increased stability when sheeted in, particularly beneficial for harness-equipped riders. Additional Leading Edge (LE) segments at the wingtips not only reduce drag but also provide added stiffness, enabling the wing to point higher. The vented strut has been updated with an additional stiffener at the Leading Edge (LE) in the center, enhancing stability in the area ahead of the fill panel, making the wing much more forgiving during tacks.

The FLY II is now constructed entirely from Teijin LE dacron, greatly enhancing its shape durability. The trailing edge panels forward of the frame are made from Challenge Code 95 for exceptional stiffness and long lasting shape control. The back windows now feature a dyneema X-ply for the optimum balance between visibility, light weight and structural integrity, while the front windows are clear PVC. The windows have been redesigned and repositioned to improve visibility.

The wide range of size options between 4.0 and 6.0 are unique to the Fly II. We have simplified the sizing between 1.8 to 3.5 compared to the previous model to make the selection process much easier.

A year after introducing the FLY, we have achieved additional development milestones and are proud to unveil the enhanced and refined models: FLY II PRO and FLY II. The development of the FLY concept has been based on using the most proven materials, examining the technical development of wingfoiling down to the smallest detail and adjusting all the set screws.

HIGH LIFT CONCEPT

Due to the highly refined LE geometry and entry shaping, each wing produces the maximum thrust (power and acceleration) for its size. This dramatically increases the range, allowing riders to use a smaller wing than is typical in each set of conditions. The result is easier handling and greater maneuverability.

HIGH TENSION CANOPY WITH STRUCTURED CAMBER LENS

The 3D shape of the canopy leading edge is defined by a series of transverse panels that converge at the wingtips. This leverages the LE Tube structure to maximize tension in the critical entry sections – the result is more lift and a higher stall angle for better acceleration in light winds, and the ability to fly efficiently at low angles of attack for better control and higher top speeds in strong winds.

VENTED STRUT

The large opening between the LE and the front of the fill panel (which connects the canopy to the strut) allows the pressure to equalize across the two sides of the wing. This improves overall performance and makes the wing even more stable.

  • Contact information
  • About Us

Kite Addiction the home of Kiteboarding / Kitesurfing in WA Western Australia
PH 08 93299333
Unit 1 / 17 Hulme Court Myaree 6154 Western Australia

Opening Hours
 New Winter Hours 10am - 20knots or 3m swell (Otherwise usual Trade)

Mon- Fri
10 a.m. - 5 p.m.

 

Saturday
10 a.m. - 3 p.m.

Sunday
CLOSED

 

Address: Unit 1/17 Hulme Court, Myaree
Western Australia, 6154
Phone: (08) 9329 9333
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.

We stock  Cabrinha, Gaastra (GA), and Naish boards, kites from Cabrinha, Naish and Gaastra
Boasting one of the largest ranges of second hand equipment in the state, you are sure to find what you need.

 Here at Kite Addiction we will trade windsurfing gear for kitesurfing gear.

We carry a large range of new and second hand stock so we can customise a rig to your needs and budget.

This site contains online catalogues of new and used gear and much, much more..

Come in and see Daniel and Reg for the best deals on the water.

Enjoy your visit.
The crew from Kite Addiction.